DJ Brake: use the offset measured on a real DSP 204
Measured: limiter threshold minus output meter is about 26 dB when the limiter starts (25.1 to 27.7, one DSP 204, one output, one piece of music), and the meter is after the output gain. So the distance is right before the first hit. The limiter flag also stayed on after raising a threshold, which would have taught a false value: only limiters starting by themselves teach now. The measuring tool no longer draws conclusions the data doesn't carry. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
4cd771eb5c
commit
63b3c17fb7
5 files changed
+106
-24
No files matched your search
@@ -145,8 +145,9 @@ Not verified yet – ask for a log (`python server.py -v`) from real hardware be
|
||||
only; whether the generator is pre or post input gain is unknown (the app therefore only lowers the outputs)
|
||||
* Device lock (`0x2C` byte 5, `0x2D`, `0x2F`, `0x11`) – implemented from the control software's behaviour and
|
||||
tested against the simulator only; no command to remove a lock is known
|
||||
* DJ Brake distance to the limiter: output meter dB minus threshold dB, corrected by what real limiter hits show (`dj_cal`);
|
||||
only the light, from the limiter-active bits, is certain
|
||||
* DJ Brake distance to the limiter: threshold minus output meter minus an offset: `DJ_METER_OFFSET` (measured once with
|
||||
`tools/dsp_measure.py`, DSP 204 only, one output and one piece of music, see `PROTOCOL.md`), then what real hits show (`dj_cal`). Other
|
||||
models start at 0 until measured. Only the light, from the limiter-active bits, is certain
|
||||
* Limiter calculator reference level (assumes limiter 0 dB = 0 dBu at the output; adjustable per device)
|
||||
* Pi Writer: raw write to a real SD card and first boot on a real Pi (only tested with an image file)
|
||||
|
||||
|
||||
Reference in new issue
Block a user