Add audio test tab with test generator, test fader and output mutes
- switch the DSP's test generator (pink/white noise, sine 20 Hz-20 kHz, command 0x39) - entering lowers all outputs to -50 dB before the generator starts; one test fader raises them together; mute buttons for every output - presets cannot be stored, recalled, imported or exported while the test runs - leaving switches the generator off first, then restores every output gain - a DSP found playing a test signal on connect goes straight into the audio test; saved gains survive an app restart (config.json) - simulator and memory-image support for the test signal Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
61400df667
commit
66f988cf08
12 files changed
+280
-12
No files matched your search
@@ -321,6 +321,25 @@ const DE = {
|
||||
"Try everything with a simulated DSP – nothing is sent to real devices. While demo mode is on, the real DSPs are disconnected.": "Alles gefahrlos mit einem simulierten DSP ausprobieren – an echte Geräte wird nichts gesendet. Solange der Demo-Modus aktiv ist, sind die echten DSPs getrennt.",
|
||||
"Not available for the demo device": "Für das Demo-Gerät nicht verfügbar",
|
||||
"Demo mode is on – switch it off to connect the real DSPs": "Der Demo-Modus ist aktiv – zum Verbinden der echten DSPs bitte ausschalten",
|
||||
// audio test
|
||||
"Audio test": "Audiotest",
|
||||
"Analog input": "Analog-Eingang",
|
||||
"normal operation": "Normalbetrieb",
|
||||
"Pink noise": "Rosa Rauschen",
|
||||
"White noise": "Weißes Rauschen",
|
||||
"Sine": "Sinus",
|
||||
"Sine frequency": "Sinus-Frequenz",
|
||||
"Input signal": "Eingangssignal",
|
||||
"Test fader": "Testfader",
|
||||
"all outputs": "alle Ausgänge",
|
||||
"Audio test running – the DSP plays {signal} instead of its inputs.": "Audiotest läuft – der DSP spielt {signal} statt seiner Eingänge.",
|
||||
"Choose a test signal above to start.": "Zum Starten oben ein Testsignal wählen.",
|
||||
"Not possible during the audio test": "Während des Audiotests nicht möglich",
|
||||
"Saving and recalling presets is blocked during the test. Stopping it switches the noise off first and then puts every fader back where it was.": "Presets speichern und laden ist während des Tests gesperrt. Beim Beenden wird zuerst das Rauschen abgeschaltet, danach gehen alle Fader zurück auf ihren ursprünglichen Wert.",
|
||||
"Stop test – back to the analog input": "Test beenden – zurück zum Analog-Eingang",
|
||||
"The test signal replaces the analog inputs of the DSP. When it is switched on, all outputs are lowered to −50 dB first – raise them slowly with the test fader.": "Das Testsignal ersetzt die Analog-Eingänge des DSP. Beim Einschalten werden zuerst alle Ausgänge auf −50 dB abgesenkt – mit dem Testfader langsam hochziehen.",
|
||||
"Audio test is on – switch it off first": "Der Audiotest läuft – bitte zuerst beenden",
|
||||
"Audio test is off": "Der Audiotest ist aus",
|
||||
};
|
||||
|
||||
const DE_PATTERNS = [
|
||||
|
||||
Reference in new issue
Block a user