Measured: limiter threshold minus output meter is about 26 dB when the limiter
starts (25.1 to 27.7, one DSP 204, one output, one piece of music), and the meter
is after the output gain. So the distance is right before the first hit.
The limiter flag also stayed on after raising a threshold, which would have
taught a false value: only limiters starting by themselves teach now.
The measuring tool no longer draws conclusions the data doesn't carry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layout and commands derived from the behaviour of its control software, tested
against the simulator only. No GEQ on this model; dynamic EQs are left untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- EQ curve computed as complex response: PEQ biquads (now incl. all-pass),
crossover filters from Butterworth/Bessel/Linkwitz-Riley prototypes
- Mag/Phase switch; phase wraps at +-180 degrees like the original software
- overlay any other channel of the device in the curve (e.g. sub/top crossover)
- EQ Bypass (0x3C) for all PEQ bands, GEQ Bypass (0x49) for the inputs,
read from the bit masks at the end of the memory image; preset import aware
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- switch the DSP's test generator (pink/white noise, sine 20 Hz-20 kHz, command 0x39)
- entering lowers all outputs to -50 dB before the generator starts; one test fader
raises them together; mute buttons for every output
- presets cannot be stored, recalled, imported or exported while the test runs
- leaving switches the generator off first, then restores every output gain
- a DSP found playing a test signal on connect goes straight into the audio test;
saved gains survive an app restart (config.json)
- simulator and memory-image support for the test signal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Device lock (hardware lock of the DSP, independent of the app lock):
- detect a locked DSP from the 0x2C answer during connect and wait for the code
- unlock with 0x2D, optionally remember the code and unlock automatically
- set a new code (0x2F) from the device settings
- simulator: --lock CODE
Demo mode:
- switch in the settings starts a simulated DSP 204/408 inside the server
- real DSPs are disconnected and greyed out meanwhile and resume afterwards
- demo devices are never saved or exported; sim.py ships with the Pi image and EXEs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Python stdlib server with SSE live updates, PIN login, remote access
- Vanilla JS web UI (English/German): mixer, channel, routing, links, limiter calculator
- Preset file export/import with undo, settings backup, lock for the desktop app
- Network (TCP 9761) and USB HID transport (Windows, macOS, Linux)
- Desktop app via pywebview, Raspberry Pi SD card writer, simulator and protocol tests
- README with import guide for Claude Code, CLAUDE.md, protocol documentation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>