The reset disconnects all DSPs first and sends them nothing, asks for two random
letters (and the PIN on the web), keeps a copy of the old config and reloads
a fresh app. Refused during an audio test or mute all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours and link group names now belong to the preset (by name, the DSP has no
IDs) and travel in preset files. DJ Brake: limiters are left out instead of
chosen; a slowly falling peak mark, an average bar, a warning before the limit,
and it learns from real hits where the limiter sits on the meter. Pinch and
double tap zoom are off. On touchscreens the dashboard only offers widget settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Remote access uses the same switch as demo mode and one column for its controls.
Button rows in settings get equal widths, checkboxes one look, link grids even
rows with their buttons aligned. No half-empty rows in the channel view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In the apps the page is only reachable through remote access, so it can only be
switched on while that runs. All its addresses are listed there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The page moves its limit down by a chosen margin. The limiter itself does not
change and the page never reveals the setting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Outputs can be left out per device, muted outputs never count. The page also
shows how far the closest watched output is from its limiter threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Optional page /djbrake (off by default) with a red light while a limiter works.
It needs no PIN and only ever gets {on, ready} from /djbrake/state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sound Lab takes filters from REW's API or a filter file onto a channel with a comparison
curve, and sends a channel's curve or filters back. Only checked against a fake server
built from REW's OpenAPI spec.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Modules are added and moved by drag and drop. Cleanup: no sideways jump between
pages, mixer strips stay together with few channels, equal card heights, compact
limiter cards without an amplifier, wider test meters, scrollable bottom bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layout and commands derived from the behaviour of its control software, tested
against the simulator only. No GEQ on this model; dynamic EQs are left untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Never tested on real hardware, so they are only selectable by hand and send no
changes until the user has compared the shown values with the DSP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A channel added in front of the group first gets the group's settings, so the
DSP (which copies from the first channel) keeps them. The group name moves along.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- typing a gain above the max level shows the limit and a warning; Apply has to be
clicked twice ("Set anyway"), the forced value also passes the server's lock
- sliders and faders show the locked range as a subtle striped zone in the track with a
stop edge at the limit, behind the knob (no more line drawn over the knob)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- network search: probes the local networks for DSPs (TCP 9761, asks for the device info)
and adds them with one click
- device ID (address byte, 1-250) under the device's advanced settings
- the Link tab became "Channel settings": links, max level per channel and channel colours
(colours moved here from the device settings); linked channels can't be selected again
- max level: software lock for the gain faders, enforced by the server (API, test fader,
copy) and the UI; a DSP turned up on the device can only be pulled down until it snaps in
- global mute button only turns red (no text)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The language switch reloads the page; it now comes back to the open settings at the same scroll position. Starting the demo selects the demo DSP without leaving the settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- clear sections (general, devices, security / remote access, backup) with headings,
short descriptions and a sticky quick-jump bar
- cards of equal height per row with their buttons aligned at the bottom, centred page width
- "add a DSP" is a compact card that opens the form (with cancel)
- phones: the DSP button shrinks instead of covering the mute/settings buttons
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- logo and DSP choice on the left, menu and buttons on the right
- the menu becomes a sidebar when it no longer fits in the top bar (measured, so it
works for every language and device name); phones keep the bottom bar with short labels
- custom logo in the settings: any PNG/JPG/WebP/SVG is scaled to a 128x128 PNG,
shown top left and as the browser icon, stored by the server and in the backup
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- a top dropped onto a free sub stands on it (same spot, pole height); the stack moves
as one, is drawn as one symbol and can be detached in the editor; "+ Stack" and a
ground-stack quick start; centre cluster and height suggestions know about stacks
- the DSP tabs became one button with a drop-down menu (status dots of the other DSPs),
so many devices fit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SoundField (new tab, static/soundfield.js):
- top view of the room with stage, speakers placed by dragging and aimed with a handle,
type presets, height, coverage, max SPL and DSP output assignment
- level map (tops by energy), sub map with phase at a chosen frequency, timing map
for delay/fill speakers, audience statistics
- suggestions with one-click apply: aiming, main height, delay line, sub centre cluster
(power alley), front fills, quick start layout
- delays from the speed of sound and temperature, written to the assigned DSP outputs
- plan stored by the server (shared, part of the settings backup)
Copy channel settings: level/filters/EQ/dynamics/routing to any channels of all connected DSPs.
Mute all: mutes every channel of every connected DSP and unmutes only what was open before,
also on DSPs that reconnect later; works while the app window is locked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- PEQ sliders no longer rebuild themselves on every change (the browser lost
the drag); only the band buttons and the curve are updated while dragging
- mixer strips show a "Ø" badge next to the link symbol when the polarity is inverted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- overlay chips read the stored selection on every click (second click hides again)
- phase view: points keep their gain position and can be dragged in both
directions, phase wraps are drawn as vertical lines like the original software,
selected band shows Q / frequency / gain next to its point
- audio test: other tabs, settings and device switching are locked until the
analog input is back; the server only accepts the test controls meanwhile
- test fader value has a fixed width and normal weight (meters no longer shift)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- EQ curve computed as complex response: PEQ biquads (now incl. all-pass),
crossover filters from Butterworth/Bessel/Linkwitz-Riley prototypes
- Mag/Phase switch; phase wraps at +-180 degrees like the original software
- overlay any other channel of the device in the curve (e.g. sub/top crossover)
- EQ Bypass (0x3C) for all PEQ bands, GEQ Bypass (0x49) for the inputs,
read from the bit masks at the end of the memory image; preset import aware
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- switch the DSP's test generator (pink/white noise, sine 20 Hz-20 kHz, command 0x39)
- entering lowers all outputs to -50 dB before the generator starts; one test fader
raises them together; mute buttons for every output
- presets cannot be stored, recalled, imported or exported while the test runs
- leaving switches the generator off first, then restores every output gain
- a DSP found playing a test signal on connect goes straight into the audio test;
saved gains survive an app restart (config.json)
- simulator and memory-image support for the test signal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Device lock (hardware lock of the DSP, independent of the app lock):
- detect a locked DSP from the 0x2C answer during connect and wait for the code
- unlock with 0x2D, optionally remember the code and unlock automatically
- set a new code (0x2F) from the device settings
- simulator: --lock CODE
Demo mode:
- switch in the settings starts a simulated DSP 204/408 inside the server
- real DSPs are disconnected and greyed out meanwhile and resume afterwards
- demo devices are never saved or exported; sim.py ships with the Pi image and EXEs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Python stdlib server with SSE live updates, PIN login, remote access
- Vanilla JS web UI (English/German): mixer, channel, routing, links, limiter calculator
- Preset file export/import with undo, settings backup, lock for the desktop app
- Network (TCP 9761) and USB HID transport (Windows, macOS, Linux)
- Desktop app via pywebview, Raspberry Pi SD card writer, simulator and protocol tests
- README with import guide for Claude Code, CLAUDE.md, protocol documentation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>