Optional page /djbrake (off by default) with a red light while a limiter works.
It needs no PIN and only ever gets {on, ready} from /djbrake/state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sound Lab takes filters from REW's API or a filter file onto a channel with a comparison
curve, and sends a channel's curve or filters back. Only checked against a fake server
built from REW's OpenAPI spec.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Modules are added and moved by drag and drop. Cleanup: no sideways jump between
pages, mixer strips stay together with few channels, equal card heights, compact
limiter cards without an amplifier, wider test meters, scrollable bottom bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layout and commands derived from the behaviour of its control software, tested
against the simulator only. No GEQ on this model; dynamic EQs are left untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Never tested on real hardware, so they are only selectable by hand and send no
changes until the user has compared the shown values with the DSP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A channel added in front of the group first gets the group's settings, so the
DSP (which copies from the first channel) keeps them. The group name moves along.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- typing a gain above the max level shows the limit and a warning; Apply has to be
clicked twice ("Set anyway"), the forced value also passes the server's lock
- sliders and faders show the locked range as a subtle striped zone in the track with a
stop edge at the limit, behind the knob (no more line drawn over the knob)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- network search: probes the local networks for DSPs (TCP 9761, asks for the device info)
and adds them with one click
- device ID (address byte, 1-250) under the device's advanced settings
- the Link tab became "Channel settings": links, max level per channel and channel colours
(colours moved here from the device settings); linked channels can't be selected again
- max level: software lock for the gain faders, enforced by the server (API, test fader,
copy) and the UI; a DSP turned up on the device can only be pulled down until it snaps in
- global mute button only turns red (no text)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- clear sections (general, devices, security / remote access, backup) with headings,
short descriptions and a sticky quick-jump bar
- cards of equal height per row with their buttons aligned at the bottom, centred page width
- "add a DSP" is a compact card that opens the form (with cancel)
- phones: the DSP button shrinks instead of covering the mute/settings buttons
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- logo and DSP choice on the left, menu and buttons on the right
- the menu becomes a sidebar when it no longer fits in the top bar (measured, so it
works for every language and device name); phones keep the bottom bar with short labels
- custom logo in the settings: any PNG/JPG/WebP/SVG is scaled to a 128x128 PNG,
shown top left and as the browser icon, stored by the server and in the backup
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- a top dropped onto a free sub stands on it (same spot, pole height); the stack moves
as one, is drawn as one symbol and can be detached in the editor; "+ Stack" and a
ground-stack quick start; centre cluster and height suggestions know about stacks
- the DSP tabs became one button with a drop-down menu (status dots of the other DSPs),
so many devices fit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SoundField (new tab, static/soundfield.js):
- top view of the room with stage, speakers placed by dragging and aimed with a handle,
type presets, height, coverage, max SPL and DSP output assignment
- level map (tops by energy), sub map with phase at a chosen frequency, timing map
for delay/fill speakers, audience statistics
- suggestions with one-click apply: aiming, main height, delay line, sub centre cluster
(power alley), front fills, quick start layout
- delays from the speed of sound and temperature, written to the assigned DSP outputs
- plan stored by the server (shared, part of the settings backup)
Copy channel settings: level/filters/EQ/dynamics/routing to any channels of all connected DSPs.
Mute all: mutes every channel of every connected DSP and unmutes only what was open before,
also on DSPs that reconnect later; works while the app window is locked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- PEQ sliders no longer rebuild themselves on every change (the browser lost
the drag); only the band buttons and the curve are updated while dragging
- mixer strips show a "Ø" badge next to the link symbol when the polarity is inverted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- overlay chips read the stored selection on every click (second click hides again)
- phase view: points keep their gain position and can be dragged in both
directions, phase wraps are drawn as vertical lines like the original software,
selected band shows Q / frequency / gain next to its point
- audio test: other tabs, settings and device switching are locked until the
analog input is back; the server only accepts the test controls meanwhile
- test fader value has a fixed width and normal weight (meters no longer shift)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- EQ curve computed as complex response: PEQ biquads (now incl. all-pass),
crossover filters from Butterworth/Bessel/Linkwitz-Riley prototypes
- Mag/Phase switch; phase wraps at +-180 degrees like the original software
- overlay any other channel of the device in the curve (e.g. sub/top crossover)
- EQ Bypass (0x3C) for all PEQ bands, GEQ Bypass (0x49) for the inputs,
read from the bit masks at the end of the memory image; preset import aware
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- switch the DSP's test generator (pink/white noise, sine 20 Hz-20 kHz, command 0x39)
- entering lowers all outputs to -50 dB before the generator starts; one test fader
raises them together; mute buttons for every output
- presets cannot be stored, recalled, imported or exported while the test runs
- leaving switches the generator off first, then restores every output gain
- a DSP found playing a test signal on connect goes straight into the audio test;
saved gains survive an app restart (config.json)
- simulator and memory-image support for the test signal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Device lock (hardware lock of the DSP, independent of the app lock):
- detect a locked DSP from the 0x2C answer during connect and wait for the code
- unlock with 0x2D, optionally remember the code and unlock automatically
- set a new code (0x2F) from the device settings
- simulator: --lock CODE
Demo mode:
- switch in the settings starts a simulated DSP 204/408 inside the server
- real DSPs are disconnected and greyed out meanwhile and resume afterwards
- demo devices are never saved or exported; sim.py ships with the Pi image and EXEs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Python stdlib server with SSE live updates, PIN login, remote access
- Vanilla JS web UI (English/German): mixer, channel, routing, links, limiter calculator
- Preset file export/import with undo, settings backup, lock for the desktop app
- Network (TCP 9761) and USB HID transport (Windows, macOS, Linux)
- Desktop app via pywebview, Raspberry Pi SD card writer, simulator and protocol tests
- README with import guide for Claude Code, CLAUDE.md, protocol documentation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>