Using the mods
Everything you need to build the update, put it on your CDJ-900NXS and use each mod. The player must run the official firmware 1.31; the builder only accepts that update.
Install
- Get the official
C900NXS.UPDfor firmware 1.31 from Pioneer DJ. - Open the builder and choose the file. It checks its SHA-256 and refuses any other file.
- Tick the mods. Ticking a mod also ticks what it needs (
hotcuekeysneedscuecolours); unticking one unticks what needs it. - Confirm the two points (no liability, code written with Claude Code) and build. Everything happens in your browser: nothing is uploaded, nothing is downloaded.
- Download
C900NXS.UPD, copy it to the root of a FAT32 USB stick and run the update from the player as you would for an official update.
Command line
The Python patcher builds exactly the same file, byte for byte. Tick the mods with the arrow keys and Space, build with Enter, accept the disclaimer by typing yes:
Or name the mods and accept with --accept:
Back to stock
Build with no mod ticked in the builder (or --stock with the patcher): the original application, relabelled so the player accepts it. Update as above. Keep this file on a stick before you try any mod.
advanced_waveforms experimental
The big waveform in RGB colours from the track's colour waveform data, and the overview in the same colours (a red-to-white gradient before 1.4.0). Called rgb_waveform before site 1.2.0; the patcher still takes that name. 1.0.1: rekordbox's colour data is used also when it is a few columns shorter than the waveform, which is common; such tracks showed the plain gradient colours before. UTILITY › WAVEFORM: BLUE / RGB (default) / 3BAND; 3BAND draws rekordbox's 3-band data (lows blue, mids amber, highs white), the overview too. 1.4.0: the overview lines up with the big waveform in every mode (3BAND's showed only the first 80 % of the track), and a track loaded over LINK gets its 3 bands too.


extended_bpm
The BPM to two decimals: the tenths as a small digit above, the hundredths in the place of the stock decimal.
phasemeter Pionaarr 2.0 experimental
A two-line phase meter instead of the four boxes: orange for the master, blue for this deck, each with a marker. UTILITY › SLIP FLASHING becomes PHASE METER: ON shows the lines, OFF the stock boxes. The orange marker needs another player as tempo master. PHASE METER has five values: STOCK (the four boxes), V1 (the two lines), V1 REVERSE (the markers run right to left), V2 and V2 REVERSE. V2: the master's row and this deck's become rulers that run past a fixed white centre line, a tick every beat, the first beat of each bar red and longer, as on the newer players. The master's bar ticks reach down and this deck's up, so one above the other they meet in one line; while the bars are in phase (within a sixteenth of a beat) that line turns green. V2 REVERSE runs the rulers the other way, from left to right. Since 0.5 the rulers are drawn into the next of three buffers before the screen takes them, so the ticks no longer tear on the player. The bar countdown right of the meter sits a few pixels further right, clear of the lines. The choice is kept over a restart.


cuecolours
When a track is loaded the player asks its database for the cues. This mod also asks for the extended cue list (the one newer players read from rekordbox's export), which carries the colours and the hot cues.
- Memory cues are drawn in the colour set in rekordbox, on the overview and on the big waveform. A memory cue without a colour, or one stored on the player, stays red.
- Hot cues A–H are drawn as small boxes with their letter, in their rekordbox colour.

hotcuekeys experimental
The CDJ-900NXS has no hot cue pads. This mod lends it three: the top three BEAT DIVIDE keys left of the jog. It needs cuecolours, which reads the hot cues from your USB.

The hot key mode
- Open UTILITY (hold MENU) and set HOT CUE KEYS to ON. The player remembers it.
- Press QUANTIZE briefly: the hot key mode switches on, and a red HOT KEYS box appears beside the QUANTIZE label. Press briefly again to switch it off (the box turns grey).
- Hold QUANTIZE for about a second to switch quantize as usual.

In the mode the BEAT DIVIDE keys are hot cues, top to bottom:
1/4 and 1/8 do nothing in the mode and stay dark: the player has three hot cue buffers, and A–C keep them. With the mode off, or HOT CUE KEYS set to OFF, the keys do what they always did.
Loading
After a track is loaded and the deck stands at its CUE point, hot cues A, B and C are buffered one after another, about a second each, like the CDJ-2000NXS does. Meanwhile:
- the big waveform stays black and appears once all are ready;
- PLAY, CUE and the hot cue keys are locked, so nothing interrupts the loading;
- the key of the hot cue being loaded blinks;
- nothing is heard: the output stays silent until the deck stands at its CUE point again.
Then the deck stands at its CUE point again, as before, and each of the three starts at once. This happens whether the hot key mode is on or not, as long as HOT CUE KEYS is ON.
Play a hot cue
Press the key briefly. The deck jumps to the hot cue and plays — also from a pause, in CDJ and in VINYL mode.
Gate
Press the key and keep holding it. The deck jumps and starts playing at once, exactly as with a short press. When you let go:
- held less than 0.5 s: it simply plays on (a normal hot cue);
- held 0.5 s or longer: it jumps back to the hot cue and stands there, ready to go again.
From 0.5 s on the key blinks slowly while you hold it, so you can see the gate is armed.
Set a hot cue
On a key without a hot cue (LED off):
- Pause the deck at the place you want.
- Hold the key for 0.8 s. The hot cue is set there — A in green, B in orange, C in blue — its LED blinks twice and then stays dim, and the box appears on the waveforms.
- It is buffered at once, so it starts instantly from the first press. The deck then stands at the new hot cue; PLAY plays from there.
Keys that already have a hot cue are not overwritten — delete the old one first.
Delete a hot cue
- Hold DELETE (beside MEMORY under the screen).
- While holding it, press the hot cue key. Its LED blinks twice and goes off, and the box disappears from the waveforms. You can delete several keys while holding DELETE.
- Let go of DELETE.
The LEDs
In the hot key mode the LEDs of 3/4, 1/3 and 1/2 show hot cues A–C; 1/4 and 1/8 are off (SLIP no longer changes them):
Good to know
- Set and deleted hot cues are saved on the USB stick, in the track's rekordbox analysis files with their colours, the same way MEMORY and DELETE keep memory cues; the player shows MEMORY for each. Like MEMORY, this works once the track has settled. Let the last one finish before you load the next track.
- A hot cue played from a buffer leaves the CUE point where it is. A gate's release stands at the hot cue; PLAY then plays from there.
- Hot cues D–H from rekordbox are shown on the waveforms but have no key.
- No slip hot cues yet: with SLIP on, a hot cue plays as without SLIP.
beatjump experimental
The TRACK SEARCH keys ◀◀ / ▶▶ jump along the track's beat grid instead of changing the track. How far is chosen in UTILITY › BEAT JUMP (where SCREEN SAVER was): OFF, 1, 2, 4 or 8 beats; 4 until you choose, and your choice stays when the player is switched off.
- The jump is exactly that many grid beats, so with 4 or 8 the phase meter shows the same place in the bar after the jump; with 1 or 2 the beats still line up, the bar moves on by one or two beats.
- Playing, it is made at once in the audio the player has already decoded: no gap, no pre-roll. Paused or at the cue it moves the deck there; PLAY plays on from it.
- The player always keeps 10 s of decoded audio ahead; a press that would leave less (very fast clicks with 8 beats) is ignored and the next one counts again. Nothing is put off, so the player never runs dry (no EMERGENCY LOOP).
- It needs
hotcuekeys(its engine makes the jumps) andcuecolours; the builder ticks them for you.
ledsaver
UTILITY › LED ANIMATION (the last item) is ON from the first start; set it to OFF to switch it off (the player keeps the choice). When the player's own screen saver dims the display (5 minutes without a track loaded, or 100 minutes paused or at the cue), the LEDs play a loop of about four and a half seconds:
- the BEAT DIVIDE keys fade in a wave from top to bottom and back up,
- SYNC and MASTER, MASTER TEMPO and DISC EJECT fade in and out against each other,
- CUE, PLAY, REV, SLIP, the SLIP LOOP bar and RELOOP/EXIT light one after another,
- the jog's three rings light in turn: inner, middle, outer, middle, inner …
Any key ends it, as it ends the screen saver.
keynotation stable
rekordbox writes each track's key as text, in whatever notation was set in its preferences when the stick was exported: 4A, 9m or Fm for the same key. This mod shows every key in one notation of your choice, UTILITY › KEY NOTATION (the last item):
- CAMELOT (default) — 1A–12A minor, 1B–12B major, as on the Camelot wheel;
- OPEN KEY — 1m–12m minor, 1d–12d major (8A = 1m = Am);
- CLASSIC — Am, F#m, Db … as rekordbox writes them;
- OFF — the key as exported.
The player converts with a table of all spellings, sharps and flats included (G#m, D#m, A#, Gbm …). It works on the main screen, in INFO and in BROWSE › KEY (the key list and its compatible-key groups such as “1A, 1B, 12A, 2A”); a new choice shows from the next track loaded.
Each key is drawn in the colour of its place on the Camelot wheel (8A pink, 5A orange, 4A yellow …), in all three notations; with OFF it stays white. A highlighted row keeps its black text, and the letters you type in SEARCH are left as they are. The player's text colour is set per text box, so the mod sets it for a key's box just before the player draws it.


credit
The boot screen says Pionaarr Mods 2.0.2 where it said Ver 1.31. Ticked at the start; untick it to keep the stock text. UTILITY and the LINK screen still show the real version, 1.31.

cuenames stable
The comment a memory cue or hot cue has in rekordbox (the cue list's comment field, exported with the stick) appears in the title bar, right of the title, in the cue's colour: always the next cue ahead that has one, a hot cue with its letter ("A DROP"). A cue just passed shows for a second more, so a cue you CALL shows its name while you stand on it. Hidden while BROWSE is open; a long title is cut short before the name. Needs cuecolours.

played stable
In BROWSE, every track loaded on this player since it was switched on is shown in green, as the player shows its loaded track. Over Pro DJ Link, modded players share what they load: a track played on another modded deck turns green here too and stays green. A track loaded on another deck right now has that deck's number in front, [1]; on several decks, all of them ([1][3]). Players without the mod are not marked. Tracks are matched by title.
For this, a modded player adds a small tag to its Pro DJ Link status packet (in bytes the 900NXS always leaves zero): "PM" and a hash of the loaded title.
![Track list with [1] Lunatica in green](assets/played.png)
endwarn stable
In a track's last 30 seconds the playing-address bar under the overview, which the player makes blink there anyway, blinks red instead of white.

quicksearch experimental
BROWSE held opens SEARCH straight away, from wherever you are; the next plain BROWSE goes back to the folder you were in. With the browse screen open, BROWSE pressed twice goes to the list the playing track was loaded from, with the track picked. Since 0.4 it tells the player's browser directly which list and row to show instead of pressing keys for you: SEARCH in about a second, the track's list in about two. Since 0.5 the browse part of the screen stands still on the last picture while the player finds its way there, so you no longer see it jump through the menus.
- BROWSE once opens the browse screen the moment you press it, as fast as without the mod. Held on, SEARCH follows from there.
- BROWSE twice counts only while the browse screen is already open (half a second or more): press once to open it, then twice to go to the playing track's list. From the normal screen two quick presses open and close it, as on a stock player.
- With the browse screen open and a track loaded, a single BROWSE closes it about a third of a second after you let go: the player waits for a possible second press.
- While SEARCH or the track's list is on its way, only the list stands still: the deck below it (time, BPM, the overview) goes on.
usbautoload experimental
When the player finds MY SETTINGS on a stick, they are loaded at once, without waiting for MENU; since 0.2 the MY SETTINGS menu no longer flashes up meanwhile. UTILITY › USB AUTO LOAD switches it.
wide_waveform stable
The big waveform runs on to the right edge of the display, where the ZOOM/GRID wheel was: 624 columns instead of 536. The playing position stays where it was, so the extra columns show what is coming. The wheel is gone; a small grey box above the waveform, over the BPM display, says what the rotary selector does now: ZOOM or GRID (held, as before, it switches). Beat grid, cue markers and loops are drawn over the whole width. Goes with every waveform mode of advanced_waveforms and with the stock blue one.


browseinfo Pionaarr 2.0 experimental
In BROWSE every track row shows the track's BPM and key on the right, the key in the notation and colour keynotation chooses. The player reads them from the stick's rekordbox export (PIONEER/rekordbox/export.pdb) a little at a time once the stick is in, and waits while the player loads a list or quicksearch is on its way, so browsing is as quick as without it; the title is shortened to make room. Over LINK the rows show them when the track is on this player's own stick. Two different tracks with exactly the same title show the first one's values.

divhold Pionaarr 2.0 experimental
The BEAT DIVIDE keys work as before when pressed short: a press turns a divide on, the same key again off, another key switches to its divide. Held down (half a second or more), a divide is on only while you hold the key: let go and it is off again, or back to the divide that was on before. SLIP and the hot key mode of hotcuekeys are left as they are. UTILITY › DIVIDE HOLD (ON by default) switches the hold off.
flacplay Pionaarr 2.0 experimental
The stock player lists FLAC tracks from a rekordbox export but stops with E-8305 UNSUPPORTED FILE FORMAT. With flacplay they play. The player's own WAV playback does the work: a .flac file opened by the player reads as a WAV file with the same samples, decoded on the fly by our own FLAC decoder, so everything the player does with a WAV works the same way: TRACK SEARCH and SEARCH, cue, loops, hot cues, the waveforms from rekordbox's analysis, and other players on Pro DJ Link loading the track from this one.
- 16 and 24 bit, mono or stereo. 44.1 and 48 kHz play as they are; 88.2 and 96 kHz are brought down to 44.1 and 48 kHz (176.4 and 192 kHz by four) with a steep low-pass filter (79 taps, nothing above 20 kHz folds back), since the player plays no higher rates.
- Every sample is decoded exactly as FLAC stores it (checked bit for bit against the original WAV files and against Windows' own FLAC decoder); jumps use the file's seek table, or find their frame without one.
- Not played: more than two channels, more than 24 bit, blocks over 16384 samples (no common encoder writes them).
exfatfs Pionaarr 2.0 experimental
The player knows FAT and HFS+, so a stick formatted exFAT (Windows' default from 64 GB, and what macOS offers for big sticks) shows as no stick at all. With exfatfs the player's own FAT32 driver sees such a stick as a FAT32 stick: the mod makes up a FAT32 boot sector, FAT and directories from the exFAT ones as the driver reads them, with the same long names; the files' data stays where it is. Browsing, the rekordbox library, playing (also fragmented files), Pro DJ Link and what the player writes to a stick itself (its folders and files under PIONEER, its changes to the rekordbox export) work as on FAT32: in the emulator it writes exactly the same bytes to an exFAT stick as to a FAT one.
- Writes go into exFAT as they come: new files and folders get their exFAT entries (names, times, checksums), files their clusters, the allocation bitmap and FAT follow. Data the player writes into newly allocated clusters waits in memory until its file is complete (up to 1 MB), so pull the stick only when the player is not writing (as with any stick).
- Partition table: MBR, GPT (macOS) or none. Clusters up to 2 MB; 512-byte sectors (every common stick).
- Not written: sticks with two FATs (TexFAT) or marked as failing; the player still works with them, its writes are kept until the stick comes out. Files of 4 GB and more (FAT32 cannot have them) show with a size cut to 4 GB.
- Tested in the emulator with sticks from 64 MB to 4 GB, every cluster split, MBR and GPT, and with a test that makes, grows, rewrites, renames and deletes thousands of files and folders in random order and checks the exFAT volume after each round against the specification.
Still to come: see Upcoming.
Status
| Mod | By | Status | Player |
|---|---|---|---|
advanced_waveforms | Pionaarr mod | experimental | ran on a player |
extended_bpm | arnoldasr | stable | ran on a player |
phasemeter | arnoldasr | experimental | ran on a player |
cuecolours | Pionaarr mod | stable | ran on a player |
hotcuekeys | Pionaarr mod | experimental | ran on a player |
beatjump | Pionaarr mod | experimental | ran on a player |
ledsaver | Pionaarr mod | stable | ran on a player |
keynotation | Pionaarr mod | stable | ran on a player |
credit | Pionaarr mod | stable | ran on a player |
cuenames | Pionaarr mod | stable | ran on a player |
played | Pionaarr mod | stable | ran on a player |
endwarn | Pionaarr mod | stable | ran on a player |
wide_waveform | Pionaarr mod | stable | ran on a player |
quicksearch | Pionaarr mod | experimental | ran on a player |
usbautoload | Pionaarr mod | experimental | ran on a player |
browseinfo | Pionaarr mod | experimental | emulator only |
divhold | Pionaarr mod | experimental | emulator only |
flacplay | Pionaarr mod | experimental | emulator only |
exfatfs | Pionaarr mod | experimental | emulator only |
FAQ
Does this touch the boot loader?
No. The builder copies the boot loader and recovery loader from the official file byte for byte and checks them again before you can download it. Only the main application changes.
Is my firmware uploaded anywhere?
No. The builder runs entirely in your browser; everything it needs comes with the page.
Can I go back?
Yes, build with no mod ticked (or --stock) and run the update. Keep that file ready before flashing mods.
Do I need rekordbox?
Cue colours and hot cues come from a USB stick exported with rekordbox. Without them the mods show what the stock player shows.
Why is the version still 1.31?
The update file says 1.32 so the player installs it; the application inside still reports 1.31 (in UTILITY and on the LINK screen). Only the boot screen says Pionaarr Mods 2.0.2 instead of Ver 1.31.